Setup Menu (Rgb Mode) - Hitachi 26LD9000TA User Manual

MENU OPERATION (continued)

Setup Menu (RGB mode)

With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals.
Selected Items
Auto Adjust
*
Image Position
*
Horizontal Clock
*
Clock Phase
Reset
Information
The items indicated by " *
0~100
0~63
" can be automatically stored the setting depending on the signal mode.
Setup
Auto Adjust
Image Position
Horizontal Clock
Clock Phase
Reset
Select
Setup hint
Adjust Horizontal Position, Vertical Position, Horizontal
Clock, and Clock Phase automatically.
OK
• Press or button to start auto adjustment.
The message "Auto Adjusting" is displayed.
• Depending on the type of the signal, there is a possibility
that the display may not be adjusted in its optimum
condition with this function. In that case, please adjust
OK
• Press button and
and vertical display positions.
Minimize the vertical stripes on the screen.
Minimize the blurring of the letters and stripes on horizontal
row.
• Make sure to adjust Horizontal Clock first before adjusting
Clock Phase.
Image Position on this menu screen can be restored to the
original factory settings by pressing
41
34
Reset
Set Return
button to adjust the horizontal
OK
button.
25