Before Operating; Before Operating Starting - Beko TF546APW Installation, Operating And Maintanance Instructions

4

Before operating

STARTING
Final Check
Before you start using the refrigerator
check that:
1. The feet have been adjusted for
perfect levelling.
2. The interior is dry and air can
circulate freely.
3. Clean the interior as recommended
under "CLEANING AND CARE."
4. Insert the plug into the wall socket
and switch on the electricity supply.
5. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running
or not which is quite normal.
6. We recommend that you set
the thermostat at 3 (three) and
monitor the temperature to ensure
the appliance maintains desired
storage temperatures (See section
Temperature Control and Adjustment).
7. Do not load the appliance
immediately it is switched on. Wait
until the correct storage temperature
has been reached. We recommend
that you check the temperature
with an accurate thermometer (see;
Temperature Control and Adjustment).
Important Notes :
1.If there is a power failure do not open
the door. Frozen food should not be
affected if the failure lasts for less than
25 hours. If the failure is longer, then
the food should be checked and either
eaten immediately or cooked and then
re-frozen.
2.If you find the freezer door difficult
to open just after you have closed it,
don't worry. This is due to the pressure
difference which will equalise and allow
the door to open normally after a few
moments.
3.You will hear a suction sound just
after closing the door. This is quite
normal.
11
EN