Specifications - Behringer Ultragain Pro Mic 2200 Specfications

2
ULTRAGAIN PRO MIC2200 Technical Specifications
ULTRAGAIN PRO MIC2200
Audiophile Vacuum Tube Microphone/Line Preamplifier
Ultra-low noise discrete microphone/line preamplifier with hand-selected 12AX7 tube for ultra-musical sound
Mic input stage based on discrete, conjugate transistor pair circuitry
Ultra-wide bandwidth from 10 Hz to 200 kHz for "open" sound
Integrated fully parametric EQs with dedicated center frequency, bandwidth and level controls
Independent line driver for converting -10 dBV into +4 dBu pro level
Soft-mute +48 V phantom power to avoid switch-on thumps
Fully tunable and switchable 12 dB high-pass filter
Switchable phase reverse for correcting phase-related problems
Accurate 12-segment LED metering for output level
Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Specifications

Audio Input
Microphone
Connectors
Type
Impedance
Maximum input level
CMRR
Line
Connectors
Type
Impedance
Maximum input level
CMRR
Audio Output
Connectors
Type
Impedance
Maximum output level
System Specifications
Frequency response
Noise
THD
IMD
Crosstalk
XLR
transformerless, DC-decoupled input
3 k Ohms balanced
+10 dBu balanced and unbalanced
typ. 40 dB, >55 dB @ 1 kHz
XLR and 1/4" jack
transformerless, DC-decoupled input
60 kOhms balanced
+23 dBu balanced and unbalanced
typ. 40 dB, >55 dB @ 1kHz
XLR and 1/4" jack
electronically servo-balanced
output stage
60 Ohms balanced,
30 Ohms unbalanced
+21 dBu balanced and unbalanced
10 Hz to 200 kHz, ±3 dB
>94 dBu, unweighted, 22 Hz to 22 kHz
0.011% typ. @ +4 dBu, 1 kHz, Gain 1
0.01% typ. SMPTE
<-88 dB, 22 Hz to 22 kHz
Function Controls
Mic gain
Frequency (lo cut)
Frequency (PEQ)
Bandwidth
Level
Output
Function Switches
+48 V
Mic/line
Phase rev.
Lo cut
x 0.1
x 10
EQ in/out
Indicators
Clip
Output level
function switch
variable (+10 dB to +60 dB)
variable (12 to 320 Hz)
variable (10 Hz to 20 kHz),
dependent on x10 and x0.1 switch
variable (0.03 to 2 octaves)
variable (-15 dB to +15 dB)
variable (-20 dB to +20 dB)
activates phantom power
switches from line to mic preamplifier
phase reverse (180°)
activates the high-pass filter
switches the frequency control to
10 Hz - 200 Hz
switches the frequency control to
1 kHz - 20 kHz
activates the parametric filter
clipping control LED
12-segment LED display:
-30/-24/-18/-12/-6/-3/0/+3/+6/
+9/+12/+18 dB
LED indicator of every switch