Table of Contents
Advertisement
01EN01DVDS253A(AU).book Page 24 Wednesday, June 7, 2006 3:39 PM
Playback
General Explanation of
On-Screen Display
This manual gives basic instructions for operating the
recorder. Some DVDs require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the
recorder or is not available on the disc.
Displaying Information While Watching TV
During viewing the TV, press ENTER or DISPLAY to
display/remove the information displayed
on-screen.
e.g., when DVD-RW in VR mode is inserted.
Indicates channel number, station name, and
audio signal (STEREO, MONO) received by
Indicates the record mode,
free space, and elapsed
time progress bar.
Indicates disc name
and format.
Indicates current date and time.
24
Displaying Disc Information on-screen
You can display various information about the disc
loaded on-screen.
1. Press DISPLAY once to show current status.
2. Press DISPLAY once again to show various
playback information.
The items displayed differ depending on the disc
type or playing status.
the tuner.
3. You can select an item by pressing
change or select the setting by pressing
For details about each item, see the pages in
parentheses.
• [Title]: Current title (or track) number/total number
of titles (or tracks) (page 25)
• [Chapter]: Current chapter number/total number
of chapters (page 25)
• [Time]: Elapsed playing time (page 27)
• [Audio]: Selected audio language (DVD VIDEO
only) or audio channel (page 26)
• [Subtitle]: Selected subtitle (page 26)
• [Angle]: Selected angle/total number of angles
(page 27)
• [Sound]: Selected sound mode (page 28)
Note:
If no button is pressed for 10 seconds, the on-screen
display disappears.
See step 3 below.
/
and
/
.
Advertisement
Table of Contents
