Char-Broil Classic C-46G Product Manual page 20

Insert front brace under control panel and between cart side panels. Make sure door hinge pin holes are on the top side and
5
facing the front. Secure front brace in upper holes using one 1/4-20x1½" screw and Fiber washer on each side. Secure
front brace in lower holes using one 1/4-20x1½" screw on each side.
NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN
ASSEMBLED TO CART.
Door Hinge Pin Hole
On back of grill, place upper back panel between side panels and above lower back panel.
6
holes, using one 1/4-20x1½" screw and Fiber washer on each side. Secure upper back panel in lower holes, using one
1/4-20x1½" screw on each side.
Fiber Washer
1/4-20x " Screw
1½
20
Front Brace
Upper Back Panel
Fiber Washer
1/4-20x1½" Screw
Secure upper back panel in upper