Char-Broil 463334613 Product Manual page 24

Place heat tents over burners by inserting tabs into slots in front of firebox.
12
Opposite ends of heat tents rest on pins in back of firebox.
Place cooking grates onto grate rests.
13
Insert ends of Swing Away pivot wire into holes in sides of grill lid. Insert ends of Warming Rack leg wire into holes in sides of firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top, Swing
Away is installed upside-down.
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto ignitor.
24
Swing Away
Leg Wire
+
-
AA Battery
Cooking Grate
Pin