Table of Contents
Advertisement
Press [2] to set disc
protection and press
[ENTER].
Press [2] to select
Press [2] to
"Start" and press
select "Yes" and
[ENTER].
press [ENTER].
Press [2] to
Press [2]
select "Start" and
to select
press [ENTER].
"Yes" and
Formatting starts.
press
≥ A message appears when
[ENTER].
formatting is finished.
Press [2] to
Press [2]
select "Start" and
to select
press [ENTER].
"Yes" and
Finalizing starts.
press
≥ A message appears when
[ENTER].
finalizing is finished.
DISC SETTING
Prog #
7
Free
0 : 42 (SP)
Used
0 : 58
Total Mark
10
Enter Title
On
Disc Protection
Erase all programs
SELECT
Format
ENTER
RETURN
[Note]
Computer data cannot be erased.
All programs
and play lists
are erased.
[Note]
Press
≥ Do not turn the unit off or disconnect the AC power
[ENTER]
supply cord while the message "Formatting the disc" is
to complete
on the television. This can render the disc unusable.
≥ Formatting takes up to a maximum of 70 minutes.
the procedure.
≥ The contents on the disc are erased when you format it even
if you have set program or disc protection.
≥ It may not be possible to use a disc on this unit if you cannot
format it.
≥ Formatting cannot be performed on DVD-R or CD-R/RW.
To stop formatting
Press [RETURN].
You can cancel formatting if it takes more than 2 minutes. The
disc must be reformatted if you do this.
[Note]
Press
≥ Do not turn the unit off or disconnect the AC power
[ENTER]
supply cord while the message "Finalizing the disc" is
to complete
on the television. This will render the disc unusable.
≥ Finalizing takes up to 15 minutes.
the procedure.
After finalizing..
≥ You cannot record or perform editing such as giving titles
and erasing programs.
≥ Programs longer than 5 minutes are divided into about
five-minute chapters.
≥ These DVD-R can be played on other Hitachi DVD players,
but this is not guaranteed. Play may not be possible due to
the player you are using, the DVD-R, or the condition of the
recording. Play the disc using this unit if you
experience problems with other equipment.
The lock symbol appears
closed when the disc is
write-protected.
35
Advertisement
Table of Contents
