Table of Contents
Advertisement
Available languages
Available languages
PLAYING A DISC
• Current repeat setting appears on the right side of the
display bar only when the Repeat setting is active.
(
T: Track repeat/
• When you are playing a disc in PROGRAM or RANDOM
mode,
PROGRAM (or RANDOM) will be displayed.
Press DISPLAY again to exit.
3
1
Press DISPLAY.
• The name of the file currently in play will be displayed.
2
Press DISPLAY again to show the current track num-
ber / total tracks, the elapsed time, the repeat status,
and the playback status at the top of the screen.
• Current repeat setting appears on the right side of the
display bar only when the Repeat setting is active.
(
T: Track repeat /
(folder) repeat).
• When you are playing a disc in PROGRAM mode or
RANDOM mode,
displayed.
3
Press DISPLAY again to exit.
Disc Navigation
1
Press
DISC NAVIGATION.
During title playback or when resume is on:
• A shot from each chapter including the one currently
being played will be displayed on the screen.
• The chapter currently being played is selected in yellow.
In stop mode (resume off):
• The first scene of each chapter of the first title will be displayed.
2
Press Arrow ( L / K /
B
• Up to 6 chapters can be displayed at one time. If the title
has more than 6 chapters, press SKIP G to go to the next
page. Press SKIP H to go back to the previous page.
• You can change the title by moving up to the field
where the title number is shown with Arrow (K), and
entering a title number of your choice.
3
Press ENTER or PLAY.
• Playback of the selected chapter will star t.
• Pressing DISC NAVIGATION before pressing ENTER or
PLAY at step 3 will cease the DISC NAVIGATION function,
and the playback will be stopped. The resume information
will be lost.
• When a disc menu is shown, the DISC NAVIGATION
does not function.
• DISC NAVIGATION takes a few seconds to respond.
• With some discs, parts of the DISC NAVIGATION screen
may not be displayed properly. This is not a malfunction.
• Some discs do not support DISC NAVIGATION function.
• The sound is muted while DISC NAVIGATION is on the screen.
• It takes about 15 seconds to display 6 shots.
Title / Chapter Search
Using the SEARCH MODE
1
Press
SEARCH MODE
twice for the Title search during
playback.
2
Enter the desired chapter/title
number using the numerical
buttons.
H , G
Using the SKIP H
G
During playback, press SKIP G
ter. Press it repeatedly to skip to subsequent chapters. Press
H to go back to the beginning of the current chapter.
SKIP H
Press it repeatedly to go to the previous chapters.
• Chapter number will appear briefly on the front display panel.
• If SKIP H
G is pressed while the playback is paused,
H or G
the playback after skipping to the next chapter will be also
paused.
A: All tracks repeat)
A: All (disc) repeat /
G: Group
PROGRAM (or RANDOM) will be
/
) to select your desired chapter.
s
once for the Chapter search,
/29
G to move to the next chap-
NOTES:
• Depending on the disc being played, the numerical buttons
can be used to search the desired chapter by entering the chap-
ter number directly. Refer to the manual accompaning the disc.
• SKIP H, G are not available when playback is stopped.
• A disc that does not contain chapters within titles, SKIP
H , G changes the titles.
MP3
Time Search
1
During playback, press
twice) to display the Time Search on the TV screen.
2
Within 30 seconds, enter a desired disc time using
the numerical buttons.
• Playback will start at the specified time.
Press CLEAR to erase the incorrect input.
•
NOTE:
• When there is no need to enter a number, "0" appears automat-
ically. For example, "0:0_:_ _" appears in the Time Search dis-
play if the total time of the title or track is less than 10 minutes.
Track Search
DVD
There are two ways to begin playback on an Audio CD and
MP3 at a specific Track.
Using the SEARCH MODE
1
Press SEARCH MODE once.
• The track search display appears.
2
Within 30 seconds, select a desired track number
using the numerical buttons.
• For the disc with less than 10 tracks, press the track
number directly.
• For discs with 10 or more but less than 100 tracks, to
play a single-digit track, press 0 first, then the track
number (e.g. for track 3, press 0, 3). To play a
double-digit track, press the track number.
• For discs with 100 or more tracks, to play a single- or a
double-digit track, press 0 first, then the track number
(e.g. for track 3, press 0, 0, 3, and for track 26, press 0,
2, 6). To play a triple-digit track, press the track number.
• Press CLEAR to erase the incorrect input.
NOTE:
• +10 button can also bring up the track search display, except
for the disc with less than 10 tracks. For such a disc, track
search can be done by just pressing the track number.
Using the SKIP H
During playback, press SKIP G
Press it repeatedly to skip to subsequent tracks. Press
H to go back to the beginning of the current track.
SKIP H
Press it repeatedly to go to the previous tracks.
• Track number will appear briefly on the front display panel.
• If SKIP H
H or G
playback after skipping to the next track will be also paused.
DVD
NOTE:
• SKIP H
H , G
G are not available when playback is stopped.
Marker Setup Screen
This function allows you to assign a specific point on a
disc to be called back later.
1
Press SEARCH MODE four times (CD: three
times) during playback.
• The display screen and Markers will appear on the TV screen.
2
Ensure that " - : -- : -- " appears in the display, and Press
s or B to select the number of the marker (1-10).
3
When you reach the desired point, press ENTER.
• The Title or Track and elapsed playing time will appear
on the TV screen.
– 12 –
SEARCH MODE
H , G
G
G to move to the next track.
G is pressed while the playback is paused, the
DVD
CD
three times (CD:
CD
MP3
DVD
CD
EN
Advertisement
Chapters
Table of Contents
