Cadence CEQ-783 Owner's Manual page 6

To the "do-it-yourselfer", if you are sure of all your connections and the unit still does not operate properly, we request that you
seek qualified help to verify that the installation was done properly before exchanging or sending the unit back for repair.
If your system turns on, slowly raise the volume of the CEQ-783. The volume should increase from all of your speakers. Rotate your
radio balance in conjunction with the CEQ-783 fader to make sure that the sound is moving correctly from left to right and front to
rear. It is important that your radio fader and balance be left in their center positions.
LINE DRIVER:
The CEQ-783 has a built-in DC to DC fully isolated power supply and is capable of producing up to 9 volts of audio output through
the RCA preamp connections. The Line Driver feature will guarantee a strong audio signal to the amps and ensure clean distortion
free audio reproduction.
/
Remote Turn On
Power
Ground
STEREO
LOUD
FM 2 93.3
-
+
5
AMPLIFIER
MAIN