Table of Contents
Advertisement
-SET UP- FUNCTIONS
CHANNEL 1 is used for the primary language (usually English).
CHANNEL 2 is sometimes used for a second language (may vary by region).
Use the CURSOR UP or DOWN to highlight the function to change, press ENTER to
change the function, and press MENU to exit.
NOTE: The word MUTE will not be displayed if the DISPLAY is ON. If you do not have
sound, make sure MUTE is not set.
• INITIAL SETTING
Select -SET UP- and -INITIAL SETTINGS- when setting your TV up for the first time.
Use the CURSOR UP / DOWN or a NUMBER from the remote to highlight the functions
desired.
• AIR / CABLE
Select this function to change between regular VHF/UHF broadcasting (AIR) and cable
(CATV1 or CATV2).
Press the CURSOR buttons to highlight the correct AIR/CABLE mode and press MENU
to exit.
Reception channels for each mode are shown at the
right.
Advertisement
Table of Contents
