Table of Contents
Advertisement
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR T.V.
The "ENTER" button will set features to your preference.
CHANNEL SELECTOR buttons
Enter two or three numbers to select channels. Enter a "0" first for channels 1 to 9. Use
the "100" button for channels 100 and higher.
Channel selection may also be performed by pressing channel up (
NOTE: THE TV MAY NOT RECEIVE SOME CHANNELS IF YOU ARE NOT IN THE
CORRECT AIR/CABLE MODE. SEE PAGE 20.
AVX button
The AVX (Auxiliary Video) button will select between the antenna signal and the two
sets of video input jacks each time the button is pressed.
VOLUME, MUTE buttons
Press the "VOLUME" up (
level.
To turn the sound on and off instantly to answer the telephone, etc., press the "MUTE"
button. Press the "MUTE" button again or press the "VOLUME" up (
the sound.
) or down (
) button until you obtain the desired sound
) or down (
)
) button to restore
Advertisement
Table of Contents
