Advertisement
NAP ID for CAPL scan list 2: 258 (00:01:02)
When using CAPL scan with scan list 1, the WCM will only try to perform NE with BS1. Also, WCM will only
try to do NE with BS2 when using CAPL scan with scan list 2.
When performing other kinds of scan types, WCM will try to do NE with BS1 and BS2.
For CAPL scan, NAP ID priority works according to the priority setting of the CAPL scan list.
Scanning process:
If the option "Automatically Connects When CM Starts" is enabled, the scan procedure will not stop if WCM
cannot find any BS. If WCM can find BSs but failed during network entry, the warning message "connection
failure" is displayed. The pop-up message alerts the end user to check the settings.
Released Documents
Version Release Notes (this document)
Product Manual
Quick Installation Guide
Specifications
Hardware Specifications
System
CPU
Flash ROM
Network Interface
USB
WiMAX Port
Standards
Wireless
I/O
DC Power input port
LED indicator
BreezeMAX USB 250 Ver.2.0 GA Release Notes
BCSM250, Wave 2
16MB
2.0
Two Printed Antennas
IEEE 802.16e-2005
DC +5.0V
WiMAX Link Status
Page 4 of 6
Advertisement
