Hitachi CR 13VA Instruction Manual And Safety Instructions page 7

15. Carefully handle power tools.
Should a power tool be dropped or struck against hard materials inadvertently, it may be
deformed, cracked, or damaged.
16. Do not wipe plastic parts with solvent.
Solvents such as gasoline, thinner benzine, carbon tetrachloride, and alcohol may
damage and crack plastic parts. Do not wipe them with such solvents.
Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry
thoroughly.
17. ALWAYS wear eye protectors during operation.
18. ALWAYS be careful with buried objict such as an underground wiring.
Touching these active wiring or electric cable with this tool, you may receive an electric
shock.
Comfirm if there are any buried object such as electric cable within the wall, floor or
ceiling where you are going to operate here after.
19. Definitions for symbols used on this tool
V ............. volts
Hz ........... hertz
A ............. amperes
n
o .......... no load speed
W ............ watt
............ Class II Construction
---/min .... revolutions per minute
English
7