Advertisement
Switches Switches
POWER ON/OFF
Press the Power switch, to switch the power ON or OFF.
n When power is ON, the power LED lights.
n
After turning OFF the switch, wait at least 5 seconds before restarting the monitor.
Otherwise the monitor may operate incorrectly.
and wait at least 30 seconds before restarting the monitor.
Make sure the power switch of the computer, power cord connection, signal cable
connection and the input sync. signal are correct.
CONTROL
the selected function, its condition, the function menu and the input signal
frequencies.
n
You can select the EasyMenu language.
Use the function "LANGUAGE SELECT".
switches.
Adjust Switches in the Table-l overleaf.
n
You can save the your geometry and colour
settings.
Refer to "SAVE" below.
n
To clear the EasyMenu, either push the status
switch again or wait for 10 seconds.
SAVE
If the function "AUTO SAVE" is ON, you can save automatically at clearing the
l - 8
Switch
Power LED
Power Switch
Sample
of "EasyMenu"
Advertisement
