Hitachi ULTRASTAR 15K450 HUS154530VLF400 Specifications page 86

3.5 inch 4gb fc-al hard disk drive
Table of Contents

Advertisement

• DCC - Data compression capable
When set to one, this flag indicates the Port supports data compression as a Sequence Initiator. The drive does not
support data compression, therefore the drive returns 0b in this field.
• DCHBS - Data compression History buffer size
This field indicates the History buffer size supported by the Port as a Sequence Initiator. The drive does not support
data compression, therefore, the drive returns 00b in this field.
• DEC - Data encryption capable
When set to one, this flag indicates the Port supports data encryption as a Sequence Initiator. The drive does not sup-
port data compression, therefore the drive returns 0b in this field.
• CSC - Clock synchronization capable
When set to one, this flag indicates the Port is capable of performing clock synchronization as a Sequence Initiator
(Clock Synchronization Server). The drive is not capable of performing clock synchronization, therefore the drive
returns 0b in this field.
The Recipient Control flags specify which functions the supplier of the Service Parameters supports when receiving frames.
• ACK_0 Cap - ACK_0 Capability
This flag only applies to class 1 or 2, therefore is not checked by the drive. The drive returns 0b in this field.
• ACK_N Cap - ACK_N Capability
This flag only applies to class 1 or 2, therefore is not checked by the drive. The drive returns 0b in this field.
• X_ID Int. - X_ID Interlock
This flag only applies to class 1 or 2, therefore is not checked by the drive. The drive returns 0b in this field.
• EPS - Error Policy Supported
0 0
0 1
1 0
1 1
The Error Policy bits are not checked by the drive. The drive returns 00b in this field.
• Categ. per Sequence - Categories per Sequence
0 0
0 1
1 0
1 1
The Receive Data Field size is the largest payload (in bytes) that the Port is capable of receiving. It must be less than or equal
to the Buffer to Buffer Receive Data Field specified in the Common Service Parameters. Sizes less than 128, greater than
2112, or not divisible by 4 are invalid, in which case the drive will respond with an LS_RJT containing a reason code of 03h
"Logical error" and a reason code explanation of 07h "Service Parm error - Rec Data Field Size". The drive returns 2048 in
this field.
The Concurrent Sequences field specifies the number of separate Sequences that the drive is capable of tracking. The value
sent must be > 0, or the drive will respond with an LS_RJT containing a reason code of 03h "Logical error" and a reason code
explanation of 09h "Service Parm error - Concurrent Seq". The drive returns a value of 255 in this field.
The End-to-end Credit field applies only to classes 1 and 2 and is therefore not checked by the drive. The drive returns 0 in
this field.
Only discard supported
Reserved
Both discard and process supported
Reserved
1 Category/Sequence
2 Categories/Sequence
Reserved
More than 2 Categories/Sequence. The drive returns 00b in this field.
Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
70

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hus154545vlf400Ultrastar 15k450

Table of Contents