Table of Contents
Advertisement
22.2.9 RU: Field Replaceable Unit (Byte 14)
The FRU (Field Replaceable Unit) field value will always be zero.
22.2.10 Sense Key Specific (Byte 15 through 17)
The definition of this field is determined by the value of the sense key field.
22.2.10.1 Sense Key Specific - Illegal Request (Sense Key = 5h)
Error field pointer is returned.
Table 266:
Field Pointer Bytes
Byte
7
15
SKSV
16
(MSB)
17
SKSV
Sense-key specific valid
0
1
C/D
Command/Data
0
1
BPV
Bit Pointer Valid
0
1
Bit Pointer
Indicates which bit of the byte number reported in Field Pointer is the bit in error. When a multiple bit field
is in error, the pointer points to the most significant bit of the field.
Field Pointer
Indicates which bytes of the command descriptor block or of the parameter data were in error. Bytes are
numbered starting from zero, as shown in the tables describing the commands and parameters. When a mul-
tiple byte field id is in error, the pointer points to the most significant byte of that field.
6
5
C/D
Reserved
Sense-key specific field is not valid.
Sense-key specific field is valid.
Indicates that the illegal parameter was in the data parameters sent by the initiator during DATA
OUT phase
Indicates that the illegal parameter was in the command descriptor block.
Bit pointer field is not valid.
Bit pointer field is significant.
Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
Bit
4
3
2
BPV
Field Pointer
372
1
0
Bit Pointer
(LSB)
Advertisement
Table of Contents
