Hitachi SH-G1000 User Manual page 191

Note:
When backing up data using the same medium again, specify the
same folder name. If you select a folder not generated for backing up, all
data in the folder will be lost.
Note:
If you check the box for Use Password, backed up data cannot be
restored unless a correct password is entered. A password can be
composed of 1 to 8 digits. You can enter A to Z, a to z, and 0 to 9.
After a confirmation message appears, tap
5.
Note:
Do not operate the device until backup is completed.
Tip:
To conserve battery strength, it is recommended to use the AC
adapter when executing data backup.
Note:
Use a memory card that has about twice as much capacity as the
in-use area size of the data storage area.
Restoration Procedure
Initialize the device. For the initialization method, see "Initialization"
1.
on page 26.
Insert a memory card containing backup data into the device, and
2.
then switch the device on.
Tap ,
3. Programs
Select
4. Restore
, and
Data Backup
, then tap .
Next
Section 2: Understanding Your Device
to start data backup.
Yes
.
2L: Backing Up Data 183