Guest Zone - D-Link DIR-685 User Manual

Section 3 - Configuration
The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet.
These zones will be separate from your main wireless network.
Tick this checkbox to enable the Guest Zone feature.
Enable Guest Zone:
Wireless Network Enter a wireless network name (SSID) that is different from your
Name: main wireless network.
Security Mode: Select the type of security or encryption you would like to enable
for the guest zone.
Router IP Address: Type the IP Address that the router will use for the Guest Zone
network.
Default Subnet Type the Subnet Mask that the router will use for the Guest Zone
Mask: network.
Tick this checkbox to prevent guest clients accessing other guest
Enable Guest Zone
Client Isolation: clients in the Guest Zone. Ticking this option only allows guest clients
to access the Internet.
Enable Routing Tick this checkbox to allow network connectivity between the
Between Zones: different zones created.
Tick the Enable DHCP Server checkbox to configure the built-in
DHCP Server
Settings for Guest DHCP server to assign IP addresses to computers in the Guest
Zone: Zone.
Specify the range of IP addresses that will be assigned to computers
in the Guest Zone in the DHCP IP Address Range fields. Type the
last IP octet of the first host in the range in the textbox on the left
and the last IP octet of the last host in the range in the textbox on
the right.
D-Link DIR-685 User Manual

Guest Zone

71