D-Link DIR-685 User Manual page 14

Section 1 - Product Overview
The following screens can be viewed on the LCD Screen using the Touch Pad buttons:
y
Time / Date - The router displays the date and time when the device has been left idle for the amount of time
specified in the Setup > LCD Setup configuration screen.
y
Router Statistics
interfaces.
y
Status - The following screens can be viewed after selecting the Status screen:
General Router Info
{
Time of the Router. The New Firmware field informs the user if there is a new firmware version available
from the D-Link website.
Internet Status
{
MAC Address, IP Address, Subnet Mask, and Gateway of the Internet Connection.
Wired Status
{
each Ethernet connection on the Router.
Wireless Status
{
SSID of the Guest network, the enabled 802.11 modes, the Security mode enabled for the Host Zone,
the Security mode enabled for the Guest Zone, MAC Address of the Wireless Radio and the WPS PIN
number.
Hard Disk Status
{
the amount of available space, the make and model, disk format, total capacity, used disk space, available
disk space, disk health, and disk temperature.
y
WPS
- The WPS (Wi-Fi Protected Setup) screen allows you to add your router into an existing network via a
PIN number, or allows you to add a new wireless device to the router via Push Button Configuration (PBC). Use
the touch pad buttons to select the desired option.
D-Link DIR-685 User Manual
- The Router Statistics screen displays the send/receive rates of the different router
- Displays the Model Name, Hardware Version, Firmware Version, and System Up
- Displays the Internet Connection Type, Cable Status, Network Status, Connection Time,
- Displays the MAC Address, IP Address, Subnet Mask, DHCP Server, and the status of
- Displays the Wireless Radio status, Wireless Channel, SSID of the Host network,
- Displays information about the Hard Drive installed in the 2.5" Hard Drive bay including
9