Guest Zone - D-Link D-Fend DIR-2680 User Manual

Section 4 - Configuration
The Guest Zone feature will allow you to create temporary zones that can be
used by guests to access the Internet. These zones will be separate from your
main wireless network. You may configure different zones for the 2.4 GHz and
5 GHz wireless bands.
Note: If Smart Connect is disabled, you will have to separately configure guest
Wi-Fi for both 2.4 GHz and 5 GHz wireless bands.
In the Settings menu on the bar on the top of the page, click Wireless, then
click the Guest Zone link.
2.4 GHz / 5 GHz
Status:
Enable or disable the 2.4 GHz / 5 GHz wireless network.
Wi-Fi Name (SSID):
Create a name for your wireless network using up to 32 characters.
Password:
Create a password to use for wireless security.
Schedule: Use the drop-down menu to select the time schedule that the rule
will be enabled for. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedules section. Refer
to Schedule on page 75 for more information.
Click Save when you are done.
D-Link DIR-2680 User Manual

Guest Zone

57