American DJ Vizi Scan LED PRO User Instructions page 16

Vizi Scan LED PRO
EDIT
- This menu item allows you to write a program into the
memory (EEPROM) via the control panel or via the external
controller. Please see pages 33-35 for detailed instructions.
SEPR
(IP01-IP07) - With this function you can edit any of
the internal programs (IP01-IP07).
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "SEPR" is displayed, press ENTER.
4. The display will show "IPXX". "XX" represeting 01-07. Tap
the UP of DOWN buttons to find your desired program to edit.
Press ENTER to edit the chosen program.
5. Press ENTER to save and press MODE/ESC to exit.
STEP
(S-01 - S-48) - With this function you can program
the number of steps in your individual Program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "STEP" is displayed, press ENTER.
4. The display shows "S-01", this stands for the first step of
your program. You can call up to 48 scenes in "Run". For exam-
ple, if "S-05" is displayed, it means that "Run" will run the first
5 scenes you saved in "Edit".
5. Press ENTER to save and press MODE/ESC to exit.
SCXX
(SC01 - SC48) - With this function you can choose
the number of scenes in your Program.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "SC01" is displayed.
American DJ - www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 31
®
System Menu Vizi Scan LED PRO
4. The display shows "SC01", this stands for the first scene of
your program. You can call up to 48 scenes. For example, if
"SC05", it means that "Run" will run the first 5 scenes you saved
in "Edit".
5. Press ENTER to save and press MODE/ESC to exit.
REC
matically for the external controller.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "REC" is displayed.
4. The display shows "RE.XX", "XX" stands for the scene
number in the internal memory of where your scenes from the
controller will be stored.
5. Press the UP or DOWN button to select your desired scene
number.
6. Press ENTER to confirm, and the fixture will record the
scenes from the external controller.
7. Press MODE/ESC to return to the main menu.
RUN
program. You can set the number of steps under Step (S-01
- S-48).
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed, press ENTER.
3. Tap the UP button until "RUN" is displayed, press ENTER.
4. Press either UP or DOWN, to select "ON" or "OFF". To run
your program select "On" and press ENTER to confirm.
5. Press MODE/ESC to return to the main menu.
American DJ
- With this function you can record the scenes auto-
With the function "RUN", you can run your pre-made
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 32
®
System Menu