American DJ Vizi Scan LED PRO User Instructions page 10

Vizi Scan LED PRO
On-Board System Menu.
easy to navigate system menu. This next section will detail the func-
tions of each command in the system menu.
To access the main menu locate the ENTER button (7) on the front
of the unit. Press this button to activate the system menu. Tap the
UP button (5) or DOWN button (6) until you reach function you wish
to change. When you reach the function you wish to change tap the
ENTER button. When a function is selected the menu will begin to
flash, use the UP button to change the function. Once your changes
are made tap the ENTER button again to lock the change in the system,
if the ENTER button is not selected within eight seconds the system
will automatically return to menu section. To exit without making any
changes tap the MODE/ESC button (4).
ADDR MENU -
ADDR
DMX Address Setting via control board -
1. Access the main menu.
2. Tap the UP button until "ADDR" is displayed, press ENTER.
3. "A001" will now be displayed. Press the UP or DOWN buttons
to find your desired address. Press ENTER to confirm.
4. The display will show "PASS", and then display, your selected
address again.
5. Press the MODE/ESC button to return to the main menu.
When the display is on "A001", you can directly press the UP
or DN buttons to change the DMX start address.
TEST MENU -
TEST
- This will test the functions of each channel.
1. Access the main menu.
2. Tap the UP button until "TEST" is displayed, press ENTER.
3. The display will show "T0-1", "1" stands for the channel
American DJ - www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 19
®
System Menu
The Vizi Scan LED PRO comes with an
Vizi Scan LED PRO
number 1, if you press the UP button until "T0-3" is displayed,
the unit will test the color channel, changing the color one by
one and showing the rainbow effect with different speeds.
4. Press MODE/ESC to exit.
PLAY MENU -
RUN
Run the unit in an Auto mode as a "master" in a
Master/Slave configuration, or as a stand alone unit -
1. Access the main menu.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
3. Tap the UP button until "RUN" is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between "MSTR" or
"ALON", select your choice by pressing ENTER, "PASS" will flash
in the display and fixture will begin its function.
AUDI
Run the unit in Sound Active mode as a "master", or
as a stand alone unit -
1. Access the main menu.
2. Tap the UP button until "PLAY" is displayed, press ENTER.
3. Tap the UP button until "AUDI" is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between "MSTR" or
"ALON", select your choice by pressing ENTER, "PASS" will flash
in the display and fixture will begin its function.
AUTO
This is a precaution mode in case you lose the DMX
signal. The fixtue has 4 modes to choose from, please see
page 16 for a description of the 4 modes -
1. Access the main menu by pressing MODE/ESC button.
American DJ - www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 20
®
System Menu