American DJ Vizi Scan LED PRO User Instructions page 13

Vizi Scan LED PRO
1. Access the main menu.
2. Tap the UP button until "DISP" is displayed, press ENTER.
3. Tap the UP button until "VALU" is displayed, press ENTER.
4. The display should show "D-00". Press the UP button in
order to select the desired channel. If you select "D-05" the
display will only show the DMX value of the 5th channel
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
Now the display will change as per the 5th channel DMX
value.
D ON
Shuts off digital display after 2 minutes.
1. Access the main menu.
2. Tap the UP button until "DISP" is displayed, press ENTER.
3. Tap the UP button until "D ON" is displayed, press ENTER.
4. "CLDI" should now be displayed, press ENTER.
5. The display will show "ON/OFF". Press the UP button to
select "ON" to activate this function, or "OFF" to deactivate this
function.
6. Press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
FLIP -
This function will reverse the display 180º.
1. Access the main menu.
2. Tap the UP button until "DISP" is displayed, press ENTER.
3. Tap the UP button until "FLIP" is displayed.
4. Press ENTER, the display will show "ON/OFF".
American DJ - www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 25
®
System Menu Vizi Scan LED PRO
5. Press the UP button to select "ON" to activate this function,
or "OFF" to deactivate this function.
6. Press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
LOCK -
button lock. When this function is activated, the buttons
will automatically lock 15 seconds after the last press of
a button. In order to deactivate the button lock, press the
MODE/ESC button for 3 seconds.
1. Access the main menu.
2. Tap the UP button until "DISP" is displayed.
3. Tap the UP button until "LOCK" is displayed, press ENTER.
4. Press the UP or DOWN buttons to select either "ON" to acti-
vate this function, or "OFF" to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
SPEC MAIN MENU -
RDMX
address via any DMX controller. This function is factory set
to "ON" already.
1. Access the main menu by pressing MODE/ESC.
2. Tap the UP button until "SPEC" is displayed, press ENTER.
3. Tap the UP button until "RDMX" is displayed, press ENTER.
4. The display will show "ON/OFF". Press the UP button to
select "ON" to activate this function, or "OFF" to deactivate.
American DJ
With this function you can activate the automatic
With this function you are able to change the DMX
- www.americandj.com - Vizi Scan LED PRO Instruction Manual Page 26
®
System Menu