Table of Contents
Advertisement
Getting Started
strap to carry the camcorder.
Attaching the Optional Wide or Tele Converter Lens
1. To remove the lens hood, turn it counterclockwise.
2. Remove both caps of the converter lens.
3. Screw the lens into the threads on the camcorder lens assembly.
Note: The wide and tele converter lenses (optional) are not water-resistant.
Loading Batteries
Install the remote control battery to prevent misplacing it.
Remote Control Battery
1. Push the tab to the right of the remote control and hold it, then remove
the battery holder.
2. Press the PLAY button and hold it for about two seconds.
3. Insert the battery with the "+" terminal facing up as shown in the figure
above.
4. Replace the battery holder with battery in the remote control making
sure that it is fully inserted.
21
Advertisement
Table of Contents
