Procedure
1
Disconnect the power-button module cable from the system-board connector
(LEDH1). See "System-Board Components" on page 11.
2
Remove the power-button module cable from the routing guides on the chassis.
3
Press the power-button module tabs to release the power-button module from the
front panel.
4
Slide the power-button module along with its cable through the slot on the front
panel.
2
3
1
power-button cable
3
power-button module
5
Set the power-button module aside.
6
Set aside the power-button module.
1
2
tabs
Removing the Power-Button Module
37
|