Procedure - Dell Inspiron 3647 Owner's Manual

Procedure

CAUTION: Be careful when sliding the front I/O panel out of the computer to
avoid damaging the connectors and the cable routing clips.
NOTE: Note the routing of all cables as you remove them so that you can re-route
them correctly after you replace the front I/O panel.
1
Disconnect the front I/O panel cables from the system board connectors (AUDF1,
USBF1, and USBF3). See "System-Board Components" on page 11.
2
Remove the screw that secures the front I/O panel to the front panel.
3 Slide the front I/O panel towards the side as shown in the illustration to release the
clamps from the front panel and pull it away.
2
3
1 front I/O panel cables (3)
3 front I/O panel
5 front I/O panel clamps (4)
7 routing guides
34
| Removing the Front I/O Panel
1
4
5
6
2 cable routing guides
4 screw
6 front panel
7