Addonics Technologies DGC11 User Manual

Digicopier xi

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

T E C H N O L O G I E S

User Guide

DigiCopier XI

(DGC11)

www.addonics.com

LCD Panel

Source tray

Destination tray 1

Destination tray 2

Destination tray 3

Destination tray 4

Destination tray 5

Destination tray 6

Destination tray 7

Destination tray 8

Destination tray 9

Destination tray 10

Destination tray 11

Auxiliary

Power Switch

v6.1.11

Table of Contents

Need help?

Do you have a question about the DGC11 and is the answer not in the manual?

Page 1 Destination tray 10 Destination tray 11 Auxiliary Power Switch User Guide DigiCopier XI (DGC11) www.addonics.com v6.1.11 Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at:...
Page 2 There are four buttons and an LCD on the panel of DigiCopier VII. 1 – LCD shows a function or a message. 2 – it is used to scroll up function menus. 3 – it is used to scroll down function menus. 4 –...
Page 3 Step 3 Populate the destination trays with blank CDs or DVD media. A rewritable DVD containing old data can also be use, but the old data will be automatically erased. Step 4 After the DVD-ROM and DVD writers detect DVDs, press ENT button to start copying.
Page 4 CONTACT US www.addonics.com Phone: 408-573-8580 Fax: 408-573-8588 Email: http://www.addonics.com/sales/query/...

Digicopier xi dgc11