Specifications - Hitachi VM-E110A Instruction Manual

Specifications

PLAYBACK OF PRE-RECORDED CASSETTE
Symptom
"PLAY" button cannot be engaged.
No picture appears on television
screen when "PLAY" button is pressed.
Interference on playback picture.
Picture bends at the top of the TV
screen.
Color of your TV screen is too bright,
too faint or change.
Specifications
General Specifications
Power requirements
Power consumption
Dimensions
211mm)
Weight
Operating temperature
Storage temperature
Video Recorder Specifications
Format
Record/playback
Video signal
Tape speed
Video input
Video output
Audio input
Check Point & Correction
Set the power switch to "VIDEO"
position.
Set the television to the
camera/recorder channel (3 or 4)
depending upon the selected channel
in the RF channel select switch of RF
output adapter. (TV is connect to the
camera/recorder by using RF output
adapter.)
When you see the playback picture on
yourTV, adjust fine tuning knob on
television set to obtain best picture.
TV receiver is older type. It needs to
be modified to work properly with
camera/recorder.
Tape is damaged, try another cassette.
TV set has VIR circuit. Turn off during
playback.
6V DC
VM-E110A: 4.7W (when recording)
VM-E310A: 5.3W (when recording)
3-11/16" W x 4-12/16" H x 8-5/16" D (94mm x 120mm x
VM-E110A: 1.90 lbs (860g) without battery pack, lens
hood, lens cap or cassette
VM-E310A: 1.87 lbs (849g) without battery pack, lens
hood, lens cap or cassette
32°F ~ 104°F (0°C ~ 40°C)
-4°F ~ 140°F (-20°C ~ 60°C)
8mm
Two video record/playback heads
EIA standard NTSC color
14.3mm/sec
1.0Vp-p, 75 ohm
1.0Vp-p, 75 ohm
-7.8dBs (316mVrms)
55