Hitachi VM-E110A Instruction Manual page 36

Getting Started - Identifying Controls
17.CAM/OFF/VIDEO Power Switch
Hold down the red button as you slide the switch to CAM or VIDEO. You do not need to
hold down the red button to slide the switch to OFF.
18. INST. ZOOM (Instant Zoom) Button
Use this button to magnify the image being recorded 1.5 times momentarily.
19. Power Zoom Switch
Use this to zoom automatically ("Using the Power Zoom," p 35).
20. Camera Light Show
Attach the DC camera light here.
21. OPEN Lever
Use this to open or close the cover of the power supply attachment holder ("Camcorder
Batteries", p15).
22. Power Supply Attachment Holder (Behind the cover)
Attach a battery or alkaline batteries here ("Camcorder Batteries", P15).
23. Hand Strap
Refer to page 26.
Right side / Bottom jacks Illustration
24. DC IN Jack (Behind the jack cover)
When using the AC adapter/charger, connect one end of the DC cord (provided) to this
jack and the other end to the DC OUTPUT jack of the AC adapter/charger. When using
the car battery cord (optional), connect this jack and the DC OUTPUT jack of the car
battery cord.
25. Start/Stop Button
When the CAM/OFF/VIDEO switch is in CAM press this button to start recording. When
pressed a second time the camera pauses. During playback use this button to stop the
tape temporarily. Pressing a second time resumes normal playback.
26. AV IN/OUT Jack (Behind the jack cover)
Use this jack to connect the camcorder to a VCR or television ("Playing Back Your
Recording," p32, "Using Synchro Edit", P43).
27. AV OUTPUT Jack (Behind the jack cover)
Use this jack to connect the camcorder to a VCR or television ("Playing Back Your
Recording," p30, 31, "Dubbing from the Camcorder to a VCR," p 42 "Recording
Television Programs," p45).
28. Date/Title Battery Compartment
36