American DJ Accu Scan 250 User Instructions page 8

Accu Scan 250™
DISPLAY MENU -
VALU (DMX-512 Value) - Display the DMX-512 value of each
channel.
D ON (Display On) - Turns digital display on or off.
FLIP - "Flips" the digital display 180º.
SPEC MENU -
SPOT - This provides a spot beam for better lamp optimization.
REST (Reset) - Resets the unit to default.
VER (Version) - Displays the software version
EDIT MENU -
RUN - This will run your own custom program.
STEP (S-01 - S-48) - These are the steps slots that you write
your programs into. There are at total of 48 steps. See edit pro-
gram, page 27.
SCXX (SC01 - SC30) - These are the scenes that are stored in
your program. There are a total of 30 scenes.
C-01 - C-08 (Channel 1 - Channel 08) - The channels of each
scene that can be edited. See page 27.
TIME (Time) - Running time of the entire program. See page 27.
CEDT - Edit program using a external controller. See page 29.
American DJ - www.americandj.com - Accu Scan 250™ Instruction Manual Page 15
®
System Menu Accu Scan 250™
On-Board System Menu.
easy to navigate system menu. This next section will detail the func-
tions of each command in the system menu.
Mode/Enter Button -
ENTER button (4) on the front of the unit. Press this button to acti-
vate the system menu. Tap the UP button (12) until you reach function
you wish to change. When you reach the function you wish to change
tap the MODE/ENTER button. When a function is selected the menu
will begin to flash, use the UP button to change the function. Once
your changes are made tap the MODE/ENTER button again to lock
the change in the system. To exit without making any changes tap the
EXIT button (13).
ADDR MAIN MENU -
ADDR
1. Access the main menu.
2. Tap the UP button until "ADDR" is displayed, press ENTER.
4. Now the display will show "A001". Adjust the DMX address
by pressing the UP or DOWN buttons.
5. Press MODE/ENTER to confirm.
6. Press the EXIT button to return to the main menu.
When the display is on "A001", you can directly press the UP
or DN buttons to change the DMX start address.
TEST MAIN MENU -
TEST
1. Access the main menu.
2. Tap the UP button until "TEST" is displayed, press ENTER.
3. The display will show "T-01". You can now press the up
button and test the different channels. For example: If you
American DJ
The Accu Scan 250™ comes with an
To access the main menu locate the MODE/
DMX Address Setting via control board -
- This will test the functions of each channel.
- www.americandj.com - Accu Scan 250™ Instruction Manual Page 16
®
System Menu