American DJ Accu Scan 250 User Instructions page 14

Accu Scan 250™
Editing procedure 1: Using the control board only.
1. Access the main menu.
2. Tap the UP button until "EDIT" is displayed. Press MODE/
ENTER.
3. The display will show "SC-01", this stands for the scene
number. For example, "SC-01" is displayed, it means you will
be editing scene 1, press MODE/ENTER. You can change the
scene number by pressing the UP button.
4. Press MODE/ENTER, the display will show "C-1", this stands
for the channel number. If "C-01" is displayed, you will be edit-
ing channel 1 of your selected scene, press MODE/ENTER. You
can change the channel number by pressing the UP button.
5. The display will show the DMX value for the channel that is
being edited. It will be displayed as "11XX", it stands for Channel
11 of the editing scene, the DMX value is "XX".
6. Adjust the DMX value by pressing the UP button, until you
get the expected effect for this channel.
7. Press MODE/ENTER to enter the editing of the other chan-
nels of the scene.
8. Repeat steps 5-8, until you finish setting all the DMX values
for all the channels of this scene, each scene can have 15
channels maximum.
9. Once all the channels are completed, the display will flash
"TIME", this stands for the time needed to run this scene.
10. Press MODE/ENTER to edit the time needed, the display
shows "T--X", "X" stands for the time needed to run this scene.
For example, "T--2" means scene 1 needs 2 seconds to run,
"T-15" means scene 5 needs 15 seconds to run.
11. Adjust the time needed by pressing the UP button.
American DJ - www.americandj.com - Accu Scan 250™ Instruction Manual Page 27
®
Editing Program Accu Scan 250™
12. Press MODE/ENTER to save the settings for the scene you
are editing, the display will change to the next scene automati-
cally.
13. Repeat steps 3-12 to edit other scenes, you can edit and
save 48 scenes maximum.
14. Press EXIT to exit, now you have edited and saved scenes
using the control board. The number of steps can be defined
under "EDIT" and the scenes can be called up under "Run". To
run the scenes see page 26.
American DJ - www.americandj.com - Accu Scan 250™ Instruction Manual Page 28
®
Editing Program