Advertisement
Bubble Blast Jr™
• Keep the outside of this device dry at all times. Do not spill water
or other liquids into or on to your unit. Be sure all bubble juice is
kept inside the fluid tray! To prevent fire or shock hazard, do not
expose this product to rain or moisture.
• Do not spill water or other liquids into or on to your unit
• Do not attempt to operate this unit if the power cord has been fray-
ed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and fire in case of an internal short
• Disconnect from main power before making any type of connection
• Do not remove the cover under any conditions. There are no user
serviceable parts inside
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6" (15cm) between this device and a wall
• Do not attempt to operate this unit, if it becomes damaged
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties
• During long periods of non-use, disconnect the unit's main power
• Always mount this unit in safe and stable matter
• Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (in-
cluding amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
American DJ Supply
www.americandj.com Bubble Blast Jr™ Instruction Manual Page 3
©
®
Safety Precautions
Bubble Blast Jr™
• High velocity fans
• Easy accessible fluid tray
• Dual output system
• Secondary Lift System to lift bubbles into the air
• High bubble output
• Low current draw
• Mountable using the LTS-5 stand
• Rugged Rust Proof Construction
• Timer Remote Control (Optional, Not Included)
• Drain Spout located on the back
Bubble Blast Jr™
The BUBBLE BLAST JR™ carries a one year (365 days) limited war-
ranty. Please fill out the enclosed warranty card to validate your pur-
chase. All returned service items whether under warranty or not, must
be freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Bubble Blast Jr™
Power Supply:
Before plugging your unit in, be sure the source volt-
age in your area matches the required voltage for your American DJ
Bubble Blast Jr.™ The American DJ
a 115v and 230v version. Because line voltage may vary from venue
to venue, be sure to plug your unit into a matching wall outlet before
attempting to operate.
Bubble Blast Jr™
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
American DJ Supply
www.americandj.com Bubble Blast Jr™ Instruction Manual Page 4
©
®
Features
Product Registration
Power Supply
Bubble Blast Jr
™
is available in
®
General Instructions
®
Advertisement
