LG U990 Service Manual page 63

3. TECHNICAL BRIEF
The VGA Camera module is connected to FPCB with 20pin Board to Board connector (AXK720147G).
Its interface is dedicated camera interface port in MSM6280. The camera port supply 13.MHz master
clock to camera module and receive 13MHz pixel clock (15fps), vertical sync signal, horizontal sync
signal, reset signal and 8bits data from camera module. The camera module is controlled by I2C port
from MSM6280.
No Name
1 CAM_PWDN
2 CAM_MCLK
3 GND
4 CAM_PCLK
5 CAM_DATA(0)
6 CAM_DATA(1)
7 CAM_DATA(2)
8 CAM_DATA(3)
9 CAM_DATA(4)
10 CAM_DATA(5)
11 CAM_DATA(6)
12 CAM_DATA(7)
13 CAM_VSYNC
14 CAM_HSYNC
15 GND
16 I2C_SCD
17 I2C_SCL
18 CAM_RESET_N
19 VREG_MSMP_2.8V
20 VREG_CAM_2.8V
Table. Interface between VGA Camera Module and FPCB (in camera module)
LGE Internal Use Only
[ Pin Description ]
Port Note
i Camera power down
I Master Clock(24M)
GND GND
O Clock for Camera Data Out(13M)
O Data
O Data
O Data
O Data
O Data
O Data
O Data
O Data
O Vertical Synch
O Horizontal Sync
GND GND
I I2C Clock
I I2C Clock
I Camera reset signal
I Camera I/O Power
I Camera I/O Power
Copyright © 2007 LG Electronics. Inc. All right reserved.
- 64 -
Only for training and service purposes