Hdmi Mode - LG 32LC41 Service Manual

15. HDMI mode

Is only video
normal?
No
Is only audio
normal?
Check the TMDS line wave.
(R312~E3273)
Is the wave
continuous?
Yes
1. Check the HDMI receiver's status register. (0x60, offset 0x66)
- If the value is 0xf or 0x8, it is normal.
2. Check the HDCP register. (0x6, offset 0x32)
- Enable bit 6 : HDCP key loaded
- Enable bit 5 : HDCP decryption active
- Enable bit 4 : HDCP authentication attempted
Reset TMDS power down/ on register.
- 0x60, offset 0x3f => 0xff
Yes
Download EDID data each port.
1. Check TV input mode.
(HDMI 1 port support HDMI and DVI.
So if you input DVI signal and PC audio from
phone jack, You can hear PC audio.)
Yes
2. Unplug and plug in the HDMI cable.
(sometimes ESD surge occurred at HDMI port.)
3. Check the HDMI Mute register. (0x68, offset 0x37)
4. Check the Audio-out channel mute register (0x68,
offset 0x32) is appropriately enabled.
No
Check HDMI source.
Change to another source or cable.
Yes No
Normal video,
Normal audio?
- 24 -
Replace the IC303.