Page 1
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. www.lgusa.com / www.lg.ca...
Page 2
It has 2 HDMI ports that connect audio and video devices with one cable and produces the highest With HDMI CEC support of LG’s audio/video device quality digital images and sound. connected to the HDMI (high-definition multimedia interface), LG TV with this logo works easily with one remote control.
This reminder is provided to call the CATV system Do not attempt to modify this product in any way installer’s attention to Article 820-40 of the National without written authorization from LG Electronics. Electric Code (U.S.A.). The code provides guidelines for Unauthorized modification could void the user’s...
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus.
Page 5
Use only with the cart, stand, tripod, bracket, of the appliance, and have the cord replaced or table specified by the manufacturer, or sold with an exact replacement part by an authorized with the apparatus. When a cart is used, use servicer.
HDMI (high-definition multimedia interface), LG TV with this logo works easily with one remote control. If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is noth- ing wrong with TV.
PREPARATION FRONT PANEL INFORMATION Here shown may be somewhat different from your TV. NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). Front Panel Controls (26 inches) CHANNEL ( )Buttons...
Page 11
Front Panel Controls (32/42 inches) CHANNEL ( )Buttons VOLUME ( )Buttons ENTER Button ENTER ENTER MENU Button MENU MENU INPUT Button INPUT INPUT POWER Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. When the TV is turned on, the indicator blinks green and then illuminates green before the picture is displayed.
PREPARATION BACK PANEL INFORMATION Here shown may be somewhat different from your TV. Back Connection Panel S-VIDEO AV IN 2 ANTENNA/ CABLE IN RGB IN DIGITAL AUDIO OUT AUDIO HDMI/DVI IN REMOTE RGB(PC) (RGB/DVI) SERVICE CONTROL IN OPTICAL RS-232C IN COMPONENT IN (CONTROL &...
Page 13
HDMI/DVI IN 1 (DVI), 2 DIGITAL AUDIO OUT Connect a HDMI (DVI) connection to either input. Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. COMPONENT IN Connect a component video/audio device to these RS-232C IN (CONTROL &...
PREPARATION STAND INSTALLATION (Only 26/32 inches LCD TV models) Here shown may be somewhat different from your TV. Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Assemble the product stand with the product as shown.
VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. 26/32 inches 42 inches 200 mm 600 mm 100 mm 400 mm NOTE Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT Here shown may be somewhat different from your TV. Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Install the CABLE MANAGEMENT as shown. CABLE MANAGEMENT Bundle the cables using the supplied TWIST HOLDER.
ATTACHING THE TV TO A WALL We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.
PREPARATION ANTENNA OR CABLE CONNECTION Here shown may be somewhat different from your TV. 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket) Antenna...
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
Page 20
When connecting HDMI cable 1. How to connect RGB IN Connect the digital set-top box to H H D D M M I I / / D D V V I I I I N N 1 1 HDMI/DVI IN AUDIO RGB(PC) (RGB/D...
Page 21
When connecting HDMI to DVI cable ANTENNA/ CABLE IN DIGITAL RGB IN AUDIO OUT HDMI/DVI IN AUDIO REMOTE RGB(PC) (RGB/DVI) OPTICAL SERVICE CONTROL IN RS-232C IN COMPONENT IN (CONTROL & SERVICE) AUDIO OUT 1 (DVI) S-VIDEO VIDEO AUDIO VIDEO MONO AUDIO DVI-DTV OUTPUT 1.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect Connect the video outputs ( Y, P ) of the DVD to the C C O O M M P P O O N N E E N N T T I I N N V V I I D D E E O O 1 1 jacks on the set. RGB IN Match the jack colors VI IN...
Page 23
When connecting with an S-Video cable AUDIO 1. How to connect S-VIDEO Connect the S-VIDEO output of the DVD to the S S - - V V I I D D E E O O input on the set. Connect the audio outputs of the DVD to the A A U U D D I I O O ANTENNA/ input jacks on the set.
EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise ( interference ) , leave an adequate distance between the VCR and TV. Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long peri- od of time (Only Plasma TV model).
Page 25
When connecting with a RCA cable ANT IN S-VIDEO VIDEO 1. How to connect ANT OUT OUTPUT SWITCH Connect the A A U U D D I I O O /V V I I D D E E O O jacks between TV and VCR.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder 1. How to connect Video Game Set Connect the A A U U D D I I O O /V V I I D D E E O O jacks between TV and external equipment. Match the jack colors.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15 pin cable 1. How to connect RGB IN AUDIO I/DVI IN RGB(PC) (RGB/DVI) SERVICE Connect the RGB output of the PC to the R R G G B B ( ( P P C C ) ) jack on the set.
Page 28
EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable CABLE IN DIGITAL RGB IN AUDIO OUT HDMI/DVI IN AUDIO REMOTE RGB(PC) OPTICAL (RGB/DVI) SERVICE CONTROL IN RS-232C IN COMPONENT IN (CONTROL & SERVICE) AUDIO OUT 1 (DVI) S-VIDEO AUDIO VIDEO MONO AUDIO VIDEO...
Page 29
NOTES the PC graphic card or consult the manufacturer of To get the the best picture quality, adjust the PC the PC graphic card. graphics card to 1920x1080, 60Hz. Avoid keeping a fixed image on the screen for a Depending on the graphics card, DOS mode may long period of time.
Page 30
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Overview When the RGB input of the set is connected to a PC Output, I I N N P P U U T T select RGB-PC with using the button on the remote control.
Page 31
Adjustment for screen Resolution, Position, Size, and Phase Auto Config. Press the A A D D J J U U S S T T button and then use button to 1024 x 768 Resolution select R R e e s s o o l l u u t t i i o o n n , P P o o s s i i t t i i o o n n , S S i i z z e e , or P P h h a a s s e e . 1280 x 768 Position 1360 x 768...
EXTERNAL EQUIPMENT SETUP AUDIO OUTPUT The TV has a special signal output capability which allows you to hook up the second TV or monitor. 1. How to connect RS-232C IN (CONTROL & SERVICE) Connect the second TV or monitor to the TV’s A A U U D D I I O O AUDIO OUT O O U U T T jacks.
DIGITAL AUDIO OUTPUT Send the TV’s audio to external audio equipment via the Digital Audio Output ( Optical ) port. 1. How to connect ANTENNA/ CABLE IN Connect one end of an optical cable to the TV Digital Audio ( Optical ) Output port. DIGITAL AUDIO OUT REMOTE...
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. Turns your TV or any other programmed equipment on POWER INPUT MODE or off, depending on mode. POWER In AV 1-2, Component 1-2, RGB-PC, HDMI1/DVI, and INPUT...
Page 35
MODE Select the remote’s operating mode: TV, DVD, VCR. COMP1 Directly, select Component1 input. HDMI 1 Directly, select HDMI1/DVI input. RGB-PC Directly, select RGB-PC input. See a list of AV devices connected to TV. When you toggle this button, the SimpLink menu SIMPLINK p p .
WATCHING TV / CHANNEL CONTROL TURNING ON TV INPUT MODE POWER INPUT First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the I I N N P P U U T T C C H H ( ( button on the TV or press the P P O O W W E E R R...
ON-SCREEN MENUS SELECTION Your TV's OSD ( On Screen Display ) may differ slightly from what is shown in this manual. Press the M M E E N N U U button and then use button to select the each menu. Press the button and then use button to display the available menus.
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) MENU EXIT TIMER Automatically finds all channels available through antenna ENTER or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes.
Add/Delete Channel (Manual Tuning) MENU EXIT TIMER A password is required to gain access to Manual Tuning ENTER menu if the Lock System is turned on. If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received.
WATCHING TV / CHANNEL CONTROL Channel Editing MENU EXIT TIMER From the default channel list created from the Auto Tuning ENTER channel search, you can create two different types of chan- nel lists in memory: “custom list” and “favorite channel list”. A custom list can be created by toggling each channel on or off with ENTER...
INPUT LIST Press the I I N N P P U U T T button to display external device that is connected to the unit, on screen. Press the E E N N T T E E R R button to change the input to the active AV 2 external device.
WATCHING TV / CHANNEL CONTROL This operates only for the devices with the logo. Please check the logo. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. SimpLink Preparations Connect the HDMI/DVI IN 1, 2 or 3 terminal of the TV to the rear terminal (HDMI output) of the Simplink...
Page 43
SimpLink Functions D D i i r r e e c c t t P P l l a a y y : : After connecting AV devices to TV, you can directly control the devices and play media without additional settings. S S e e l l e e c c t t A A V V d d e e v v i i c c e e : : Enables you to select one of AV devices connected to TV and play it.
WATCHING TV / CHANNEL CONTROL INPUT LABEL Sets a label to each input source which is not in use when MENU EXIT TIMER you press the INPUT button. ENTER MUTE Language : English M M E E N N U U Press the button and then use button to...
KEY LOCK The TV can be set up so that it can only be used with the MENU EXIT TIMER remote control. This feature can be used to prevent unauthorized viewing by ENTER locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL INPUT MODE POWER This feature lets you choose the way an analog picture with a 4:3 aspect ratio is INPUT displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio RATIO on your 16:9 TV, you need to specify how the picture is to be displayed.
PRESET PICTURE SETTINGS INPUT MODE POWER INPUT Picture Mode - Preset RATIO COMP1 HDMI1 RGB-PC SIMPLINK Picture Mode adjusts the TV for the best picture appearance. PICTURE SOUND ADJUST Select the preset value in the Picture Mode menu based on the program category.
PICTURE CONTROL Color Tone - Preset MENU EXIT TIMER Choose one of three automatic color adjustments. Set to ENTER warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), C C o o l l o o r r T T e e m m p p e e r r a a t t u u r r e e is automatically change.
MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode MENU EXIT TIMER Adjust the picture appearance to suit your preference and ENTER viewing situations. MUTE Picture Mode : User1 M M E E N N U U Press the button and then use button Color Temperature : Cool...
PICTURE CONTROL Color Tone - User Mode MENU EXIT TIMER You can also adjust the detailed settings (Red, Green, Blue) ENTER by selecting the C C o o l l o o r r T T e e m m p p e e r r a a t t u u r r e e - - U U s s e e r r menu. This feature operate only if the picture mode set U U s s e e r r 1 1 or U U s s e e r r 2 2 .
XD - PICTURE IMPROVEMENT TECHNOLOGY XD is LG Electronic’s unique picture improving technology MENU EXIT TIMER to display a real HD source through an advanced digital sig- nal processing algorithm. ENTER When selecting Picture Mode options (Dynamic, Standard, and Mild), XD is automatically changed to Auto.
PICTURE CONTROL ADVANCED - CINEMA 3:2 PULL DOWN MODE Set up the TV for the best picture appearance for viewing MENU EXIT TIMER movies. When you operate Cinema 3:2 Mode (3:2 Pull-Down Mode ENTER or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display.
ADVANCED - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen MENU EXIT TIMER using the black level of the screen. This feature operates only in AV1, AV2, HDMI1, HDMI2, or ENTER HDMI3 mode. MUTE Picture Mode : User1 M M E E N N U U Press the...
PICTURE CONTROL PICTURE RESET Use to quickly reset all the Picture menu options to their MENU EXIT TIMER original factory preset values. ENTER MUTE Picture Mode : User1 M M E E N N U U Press the button and then use button Color Temperature : Cool...
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELLER (AUTO VOLUME) Scans for changes in sound levels during commercials, then MENU EXIT TIMER adjusts the sound to match the specified audio level. Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV pro- ENTER gram.
SOUND &LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) INPUT MODE POWER INPUT Sound Mode lets you enjoy the best sound without any special RATIO adjustment because the TV sets the appropriate sound options COMP1 HDMI1 RGB-PC SIMPLINK based on the program content. PICTURE SOUND ADJUST...
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. Sound Mode : Standard Press the M M E E N N U U button and then use button Auto Volume : On to select the A A U U D D I I O O menu. Balance TV Speaker : On...
SOUND &LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and MENU EXIT TIMER room situations. ENTER MUTE Sound Mode : Standard M M E E N N U U Press the button and then use button Auto Volume : On...
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. MENU EXIT TIMER Feature turns the TV Speakers option On or Off. ENTER MUTE Sound Mode : Standard M M E E N N U U Press the button and then use button...
SOUND &LANGUAGE CONTROL STEREO/SAP BROADCAST SETUP INPUT MODE POWER INPUT This TV can receive MTS stereo programs and any SAP ( Secondary RATIO Audio Program ) that accompanies the stereo program if the sta- tion transmits an additional sound signal as well as the original COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST...
AUDIO LANGUAGE Other languages may be available if a digital signal is pro- MENU EXIT TIMER vided by the broadcasting station. This feature operates only in DTV/CADTV mode. ENTER MUTE Language : English Press the M M E E N N U U button and then use button Input Label...
SOUND &LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected lan- MENU EXIT TIMER guage. First select your language. ENTER MUTE Language : English M M E E N N U U Press the button and then use button...
CAPTION MODE INPUT MODE POWER INPUT Caption must be provided to help people with hearing loss watch RATIO COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST MENU EXIT TIMER ENTER Use the C C C C button to select Caption O O n n or O O f f f f . When selecting O O f f f f , Sub-menus for Analog, DTV, and Digital Option become disabled.
SOUND &LANGUAGE CONTROL Analog Broadcasting System Captions MENU EXIT TIMER Select a caption mode for displaying captioning information if ENTER provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
Digital Broadcasting System Captions MENU EXIT TIMER Choose the language you want the DTV/CADTV Captions ENTER to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set MUTE Language : English...
SOUND &LANGUAGE CONTROL Caption Option MENU EXIT TIMER Customize the DTV/CADTV captions that appear on your ENTER screen. This function in only available when Caption Mode is set MUTE Press the M M E E N N U U button and then use button to select the O O P P T T I I O O N N menu.
TIME SETTING CLOCK SETTING Auto Clock Setup MENU EXIT TIMER The time is set automatically from a digital channel signal. ENTER The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function.
Manual Clock Setup MENU EXIT TIMER If the current time setting is wrong, reset the clock manually. ENTER MUTE Clock : Oct 19, 2007, 03:44 AM M M E E N N U U Press the button and then use button Off Time : Off...
AUTO ON/OFF TIMER SETTING This function operates only if the current time has been set. MENU EXIT TIMER The O O f f f f T T i i m m e e function overrides the O O n n T T i i m m e e function if they are both set to the same time.
TIME SETTING SLEEP TIME SETTING INPUT MODE POWER INPUT The Sleep Time turns the TV off at the preset time. RATIO Note that this setting is cleared when the TV is turned off. COMP1 HDMI1 RGB-PC SIMPLINK PICTURE SOUND ADJUST MENU EXIT TIMER...
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for MENU EXIT TIMER 10 minutes. ENTER MUTE Clock : Oct 19, 2007, 03:44 AM M M E E N N U U Press the button and then use button Off Time : Off...
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories.
Page 73
Set Password Change the password by inputting a new password twice. For USA For Canada Lock System : Off Lock System : Off After inputting the password, use the button Set Password Set Password to choose S S e e t t p p a a s s s s w w o o r r d d . Block Channel Block Channel Movie Rating...
PARENTAL CONTROL /RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. Lock System Set Password Selection ( ) leads you to the Block Channel block channel screen. Movie Rating After inputting the password, use the button...
MOVIE & TV RATING Movie Rating (MPAA) - for USA only MENU EXIT TIMER Blocks movies according to the movie ratings limits speci- ENTER fied, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level.
Page 76
PARENTAL CONTROL /RATINGS TV Rating Children - for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not Lock System : Off apply to other TV programs. Unless you block certain TV pro- Set Password grams intended for mature audiences in the TV Rating - sub Block Channel...
Page 77
TV Rating English - for CANADA only Selecting canadian english language rating system. Lock System : Off After inputting the password, use the button to Set Password choose T T V V R R a a t t i i n n g g - - E E n n g g l l i i s s h h . Block Channel TV Rating-English Press the...
APPENDIX TROUBLESHOOTING T T h h e e o o p p e e r r a a t t i i o o n n d d o o e e s s n n o o t t w w o o r r k k n n o o r r m m a a l l l l y y . . Check to see if there is any object between the product and the remote control causing obstruction.
Page 79
T T h h e e a a u u d d i i o o f f u u n n c c t t i i o o n n d d o o e e s s n n o o t t w w o o r r k k . . Press the VOL or VOLUME button.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while.
PRODUCT SPECIFICATIONS The specifications shown above may be changed without prior notice for quality improvement. 26LC7D 32LC4D 42LC4D MODELS (26LC7D-UK) (32LC4D-UJ) (42LC4D-UJ) 26.6 x 20.9x 8.7 inches 31.8 x 23.8x 9.8 inches 40.7 x 29.5 x 1 1.3 inches Including stand 676.5 x 531.0 x 221.0mm...
APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote.
IR CODES 1. How to Connect Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes Output waveform Single pulse, modulated with 37 .917KHz signal at 455KHz Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 Configuration of frame 1st frame...
Page 86
APPENDIX Code Code Function Note Function Note (Hexa) (Hexa) TV INPUT Remote control Button COMPONENT1 Discrete IR Code INPUT Remote control Button (Component1 Input Selection) POWER Remote control Button (Power On/Off) COMPONENT2 Discrete IR Code RATIO Remote control Button (Component2 Input Selection) TIMER Remote control Button RGB-PC...
EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. Note: RS-232C on this unit is intended to be used with third party RS-232 control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software.
Page 88
APPENDIX RS-232C Configurations Either cable below can be used. 7-Wire Configuration 3-Wire Configurations ( Serial female-female NULL modem cable ) ( Not standard ) D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID MENU EXIT TIMER Use this function to specify a TV ID number. ENTER p p .
Page 89
Command Reference List DATA DATA C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 (Hexadecimal) (Hexadecimal) 0 ~ 1...
Page 90
APPENDIX 0 0 1 1 . . P P o o w w e e r r ( ( C C o o m m m m a a n n d d 2 2 : : a a ) ) 0 0 5 5 .
Page 91
0 0 9 9 . . C C o o l l o o r r ( ( C C o o m m m m a a n n d d 2 2 : : i i ) ) 1 1 5 5 .
Page 92
APPENDIX 2 2 0 0 . . B B l l u u e e A A d d j j u u s s t t m m e e n n t t ( ( C C o o m m m m a a n n d d : : $ $ ) ) To adjust blue in color temperature.
Page 93
Data5: Main/Sub Two/One Using Physical Step Part Channel Picture Channel Reserved Main NTSC Air No Use NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved Reserved 2 2 2 2 . . C C h h a a n n n n e e l l A A d d d d / / D D e e l l ( ( C C o o m m m m a a n n d d : : m m b b ) ) The table above lists the binary code which must be converted to Hexadecimal before sending.