LG 32LC41 Service Manual page 14

(5) Push the Update NVM from File
4.4. Tool Option Area Option Change
Before PCB check, have to change the Tool option and Area
option
Option values are below
(If on changed the option, the input menu can differ the model
spec.)
The input methods are same as other chassises(Use adj Key
on the Adjust Remote control)
Tool Option
Inch ZA
26 02240
32 02256
37 02264
42 02272
Area Option Depend on PR
4.5. Color carrier Adjustment
(Inspection process)
(1) Tuning the RF signal
ZA, TA : PAL Philips Pattern(with color Bar)
MA : NTSC Digital Pattern(with color Bar)
(2) push the "adj" key in the adjustment remote control.
TA
04288
04304
04312
04320
5. EDID
(The Extended Display Identification Data )
/DDC
(Display Data Channel)
* Caution
- Use the proper signal cable for EDID Download.
- Never connect HDMI & D-SUB Cable at the same time.
- Use the proper cables below for EDID Writing.
For RGB EDID
* EDID Data
Item
Manufacturer ID
Version
Revision
<EDID DATA Analog Set : 128bytes>
< EDID DATA HDMI Set : 256bytes>
- 14 -
download
For HDMI EDID
Condition Data
GSM 1E6D
Digital : 1 01
Digital :3 03