Panasonic Easa-Phone VA-123210 Installation Manual page 15
Easa-phone key telephone system
Hide thumbs
Also See for Easa-Phone VA-123210:
- Operating instructions manual (43 pages) ,
- Installation and programming manual (152 pages) ,
- Installation and programming manual (152 pages)
Advertisement
Make connections
according
to the following
single line telephone
connecting
method
and the 2 Key TEL/2
SLT connecting
method.
When inserting
a card, make sure that the card top and bottom
ribs are aligned
with the respective
slots located
at
the regular positions
inside the key service unit. Programming
is required
for connecting
a single line telephone
(See page 62).
(I
) Connection
of station card II
(VA-30941
D)
Insert the station
card II into the key
service unit,
and insert the other piece
into
its slots to the right
of the first
card.
One card
is capable
of making
4 single line telephones
usable.
(1
) Connection
of Station
card III
(VA-30942D)
(2)
Connection
of single line telephone
Connect
each of single line telephones
to the respective
jacks located
on the
right
side card. The jacks are allotted,
in
order
from
the
top,
extensions
No. 41 through
No. 38 respectively.
Insert the station
card III into the key
service unit
(for key TEL)
and insert
the other piece (for SLT) into its slots.
One card is capable
of making
2 key
telephones
and 2 single line telephones
usable.
(2)
Connection
of Key TEL/SLT
Connect
each of key telephones
to the
respective
jacks
located
on the key
T-EL
card.
Then,
connect
each
of
single line telephones
to the respective
jacks located on the station card II.
The jacks on the key TEL
card are
allotted,
in order from the top, exten-
sions No. 39 and No. 38, while
those
on the SLT card are allotted,
in order
from
the top, extensions
No. 41 and
No. 40.
EXT.
No. 41
EXT.
No. 40
EXT.
No. 39
EXT.
No. 38
(Station
card
II )
EXT.
No. 38
EXT.
No. 41
EXT.
No. 39
Advertisement
