Setting Network Access Parameters; Logging In To The Web-Based Configuration Utility; Configuring Internet Access Parameters - Huawei HG658c User Manual

2 Setting Network Access Parameters

2.1 Logging in to the Web-based Configuration
Utility
Most parameters of the HG658c are pre-set before delivery to meet common
home application scenarios. To check the HG658c's working status or configure
certain advanced network functions, use the web-based configuration utility.
To log in to the web-based configuration utility:
1. Open a browser on your computer. Enter http://192.168.1.1 in the address
box, and then press Enter.
2. On the login page, enter your user name (user by default) and password
(HuaweiUser by default).Click Login.
After the system verifies your account information, the web-based
configuration utility is displayed.

2.2 Configuring Internet Access Parameters

After logging in to the web-based configuration utility, you can use the
setup wizard to quickly configure the HG658c.
1. Log in to the web-based configuration utility.
2. Click Setup Wizard.
3. Click Next.
4. In User name and Password, enter the user name and password that are
provided by your service provider, and then click Next.
5. Set WLAN parameters by choosing Basic > WLAN. You can configure the
SSID and WPA pre-shared key. The default wireless network name
(SSID) are printed on the label of the HG658c's rear panel are preset before
delivery. And then click Next.
6. Check that the wireless name you set is correct, and then click Submit.
4