Table of Contents
Advertisement
Inserting the memory card (microSD™)
WARNING
The memory card is very fragile. Take care when you insert or remove the memory card.
The memory card can be inserted or withdrawn while the phone is in use. However, it may suffer damage if withdrawn
during a read or write operation. Ensure that no application accesses the card during its withdrawal.
Some memory cards must be formatted with a PC before first use with the phone.
Switching ON/OFF
When your phone is off, a short press on
When the phone is ON, if you are browsing inside the menus, a short press on
you are in the idle screen, a long press on
Getting started
When you switch on your phone for the first time, follow instructions displayed on the screen.
If access to the SIM card is protected, the device prompts you to enter the PIN number:
Enter the code between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screen
for security reasons.
After pressing [OK], the phone activates the SIM card settings and switches on again if necessary (depending on the SIM
card).
Quick start
-
Turn the phone back and remove the back cover.
-
Insert the memory card pushing it until it clicks into place.
-
Place the back cover.
-
To remove the card, first make sure that no application is accessing the card,
then slightly push the top edge of the card to release it and pull it out of the slot.
will turn it ON.
will switch OFF the phone.
will come back to the idle screen. When
11
Advertisement
Table of Contents
