Huawei HG532t User Manual page 21

Step 5
Place the HG532t and the computer in an open space. Although
radio signals can pass through obstacles, passing through too
many obstacles, such as walls and columns may negatively impact
the transmission of WLAN radio signals.
What can I do if I cannot access the Internet through a wireless network
adapter?
Step 1
Ensure that the power cables and telephone lines of the HG532t
are connected properly.
Step 2 Check whether the WLAN indicator of the HG532t is on.
If the WLAN indicator is off, the WLAN function of the HG532t is disabled. If
this is the case, enable the WLAN function.
For details about how to enable the WLAN function, see section 5.2 "5.2
Enabling or Disabling the Wireless Network Function".
Step 3 Look at the description of the wireless network adapter that is
installed on the computer and check whether the wireless network
adapter supports the 802.11b, 802.11g, or 802.11n protocols.
If the wireless network adapter does not support the preceding protocols,
replace it.
Step 4 Check whether the driver for the wireless network adapter is
installed on the computer properly.
If the driver is installed improperly, re-install it.
Step 5 Check whether the computer can receive signals from the WLAN.
Using a computer that runs Windows XP as an example, check whether the
computer can receive signals from a WLAN by doing the following:
1. In the Control Panel window, double-click Network Connections
to display the Network Connections window.
2. In the Network Connections window, right-click Wireless
Network Connection and choose View Available Wireless
Networks.
If the computer cannot detect a WLAN, place the computer close to the
HG532t and ensure that no obstacles (such as cement or wooden walls) are
present between the computer and the HG532t.
Step 6 Check whether the computer accesses the WLAN of the HG532t
successfully.
Check the list of wireless network connections and ensure that the HG532t is
connected to the WLAN.
16