Huawei HG532s User Manual page 8

Ensure that the power adapter meets the specifications indicated on the

device nameplate.
Ensure that the power adapter meets the requirements of Clause 2.5 in

IEC60950-1/EN60950-1 and it is tested and approved according to national
or local standards.
For pluggable device, the socket-outlet shall be installed near the device

and shall be easily accessible.
The adapter shall be installed near the equipment and shall be easily

accessible.
Only can use adapter as below:
Adapter mfg: Shenzhen OCT Xinqiao Technology Co.,Ltd,
−
Dongguan Shilong Fuhua Electronic Co.,Ltd
−
Adapter 1 model: HW-120100B6W
−
I/P:100-240V,50/60Hz,0.5A,O/P 12V, 1.0A
−
Adapter 2 model: HW-120100E6W
−
I/P:100-240V,50/60Hz,0.5A,O/P 12V, 1.0A
−
The plug considered as disconnect device of adapter.
−
Safety of Children
Keep the device and its accessories out of the reach of children. Otherwise,
they may damage the device and its accessories by mistake, or they may
swallow the small components of the device, causing suffocation or other
dangerous situations.
Maintenance
If the device is not used for a long time, power it off, and then remove all the

cables connected to it.
If any exception occurs, for example, if the device emits any smoke or

unusual sound or smell, stop using the device immediately, power it off,
remove all the cables connected to it, and then contact an authorized
service center.
Do not trample, pull, or overbend any cable. Otherwise, the cable may get

damaged, causing malfunction of the device.
3