Display Screen; Set The Time And Day; Temperature Setting - Honeywell PRO4000 Series User Manual

Display screen

Low battery
warning
Current inside
temperature
Current program
period
Wake/Leave/
Return/Sleep
Adaptive Intelligent
Recovery
tM

Set the time and day

1. Press the SET button, then press
or to set the clock time.
s t
2. Press the SET button, then press
or to select the day of the
s t
week.
3. Press RUN to save & exit.
If the display flashes Set Clock,
Note:
the thermostat will follow your settings
for the weekday "Wake" time period
until you reset the time and day.

temperature setting

(or Desired Temperature
when changing temperature)
Replace Batt
Inside
75
Recovery
6 : 30
Wake
Wed
Current day/time
System Status
Cool on: Cooling system is on.
Heat on: Heating system is on.
em: Emergency heat is on.
Set T o
75
Aux: Auxiliary heat is on.
AM
** Only for heat pumps with
Em Aux
this capability (select models
Heat On
only).
If flashing, compressor
protection is engaged.
2
Set
Clock
6 : 30
AM
Set Day
Wed
**
**