Playing Records - Technics SL-1200M3D Service Manual

SL-1200M3D J
] EP record
adaptor
o _oo
_ght
os,ohtswtch
==Playing records
Preparation
Put a record on the turntable.
Take off the stylus cover and release the arm clamp.
[] Turn [power] to turn the unit on.
•The pilot _ampcomes on.
• 33 1/3rpm is automatically selected and the indicator lights.
• Press 145] if you are playing a 45 rpm record.
[] Press [start-stop].
Theturntable startsrevolving,
_] Lift the cue lever and move the tone arm over the
record.
LK1Lower the cue lever.
Thetonearm movesdownandplaystarts.
When play finishes
! Lift the cue lever end move the tone arm back to the arm rest.
I Press [start-stop].
The electronic brake gently stops the turntable,
Turn [power] to turn the unit off.
C_amp the tone arm and put the stylus cover back on.
To temporarily stop play
Lift the cue lever,
The stylus liftsoff the record.
When using EP records
Take the adaptor out of its holder[] and fit it over the center spindle.
Press [45] to change the speed.
To light up the stylus []
• Press the stylus light switch, The light rises up and illuminates the
stylus,
• When the light is not required, press it down, The light also goes out.
Press the switch firmly. If the switch is lightly pressed, the light may
come on but not rise up.
--8--