Alphanumeric Display - HHB DualBurn CDR-882 User Manual

FADER button. The CDR-882's FADER function allows
playback or recording to start or end with a smooth fade-in
or fade-out as appropriate. The fade-in and fade-out times
used are set via the Audio sub-menu of the menu system.
See page 29 for more details.
The actual operation of the FADER function will depend on
the CDR-882's status when the button is pressed.
STATUS
STOP mode Playback starts from track 1 with fade-in
PLAY mode Audio fades out, drive enters PAUSE mode
PAUSE mode Playback resumes, with fade-in
RECORD PAUSE Recording starts from paused location, record level
mode fades up
RECORD mode Record level fades down, unit enters RECORD PAUSE
mode
Fade-in and fade-out are confirmed on the display by the
flashing legend FADE-IN or FADE-OUT.
Keyboard socket. This PS/2 socket is a duplicate of that
on the unit's rear and is for the connection of a QWERTY
keyboard for CD Text data entry.
Headphone socket. Connect a pair of stereo headphones
via the ¼" jack socket monitoring for private listening. The
stereo signal available at this connector is determined by
the setting of the MONITOR and PHONES SELECT buttons
[18] and [29] respectively, and also the Phones Mix option
in the Audio submenu. Headphones with a minimum
impedance of 32Ω should be used.
Headphone level control. This is a conventional analogue
volume control for the headphone output.
Drive select LEDs. Each drive has a blue SELECT LED (each
side of the main display).
One SELECT LED will always be illuminated, according to the
selection made with the DRIVE SELECT button (27). (Note
that if one drive already has a disc inserted at power-up, it
will be selected as the active drive automatically.)
Drive activity LEDs. Each drive has a tricolour ACTIVITY
LED (each side of the main display).
The LED indicates the current status of each drive.
LED INDICATION
Off No disc in drive
Amber Disc loaded, drive in STOP mode
Green (blinking) Drive in PLAY mode
Green (flashing) Drive in PAUSE mode
Green (steady) Drive is source in COPY mode
Red Drive in Record Mode
Bargraph meter. This 11-segment stereo bargraph meter
provides indication of record or playback level, depending on
the MONITOR button [18] and Output Mix settings in the
Audio submenu.
The meter has digital scaling, from -40dBFS to 0dBFS.
CDR-882 User Manual Version 1.0
ACTION ON PRESSING FADER
STATUS
Front Panel Features

Alphanumeric Display

The front-panel transreflexive 128 x 64 pixel LCD gives disc
timing information and transport mode for each drive in
large text and symbols, plus additional textual information
such as currently selected input, media type in use,
operational mode, 'active' drive, etc. in a smaller font at the
top of the display.
Currently selected input -
Balanced, Unbal, AES/EBU, Coax, Optical
Word clock source -
Internal, DIG, WCLK
Track number and time display for Drive 
Track number and time display for Drive 
Media type in Drive 1 - CD, CD-R, CD-RW
Time display option for Drive 1 - TRACK, REMAIN, TOTAL,
TOTREM
Record/Playback mode - Single, DualBurn, DiscSpan
Currently 'active' drive - CD or CD
Time display option for Drive 2 - TRACK, REMAIN, TOTAL,
TOTREM
Media type in Drive 2 - CD, CD-R, CD-RW
Peak signal level indication. *
* Provides a numeric indication, in dBs, of peak signal level
relative to clip. (Clip is taken as 0dB, thus all indications
are negative). Only displayed during RECORD, or when
input monitoring is selected.
www.hhb.co.uk