Installing The Sagem Turbo Plug Adapter - Sagem TURBO PLUG User Manual

2.3

Installing the SAGEM TURBO PLUG adapter

Before connecting the SAGEM TURBO PLUG adapter, make a note of its
password (Security ID) and keep it to hand for network configuration purposes.
!
The password (Security ID) can be found on the rear panel of the adapter.
Connect one of the R45 type terminations of the Ethernet cord (2a) (supplied in the
packaging) to your computer's Ethernet port.
Connect the other R45 type termination to the ETH socket on the SAGEM TURBO
PLUG adapter.
Plug the SAGEM TURBO PLUG adapter via its mains plug into a wall socket power
outlet.
Commissioning the SAGEM TURBO PLUG requires no driver
Reproduction and communication prohibited without permission of Sagem Communication
2 - Pre-requisites - Description - Installation
SAGEM TURBO PLUG UG - 252207972-01
13
Page