2. Pre-requisites - Description - Installation
In this section, we will show you how to install your SAGEM TURBO PLUG adapters.
2.1
Requisite system configuration of the SAGEM TURBO PLUG
To be able to use your SAGEM TURBO PLUG, your PC must meet the following conditions:
♦
Operating systems: Windows
Windows
XP,
♦
Ethernet connection.
Your computer, or at least the device to which the SAGEM TURBO PLUG will be
connected, must have an Ethernet interface, that is, a network card.
Reproduction and communication prohibited without permission of Sagem Communication
2 - Pre-requisites - Description - Installation
98SE, Windows
SAGEM TURBO PLUG UG - 252207972-01
Me, Windows
2000
or
11
Page