JUKI LU-2216N-7 Specifications page 2

Distance from machine arm to needle as long as 650mm.
The machine responds outstanding it to the sewing of large,
heavy materials such as car seats and furniture.
Higher productivity
Both the LU-2216N-7 (1-needle)
and LU-2266N-7 (2-needle) achieve
the maximum sewing speed of
3,000rpm. With this capability,
the machine demonstrates higher
productivity when sewing long
lengths of materials.
Longer distance from machine arm to needle
With the long distance from the machine arm to the
center of the needle, a full 650mm, the machine is
ideally suited to reinforcement stitching processes for
attaching tape and intermediate sewing processes such
as topstitching for large work pieces.
The vertical stroke of the walking
foot and presser foot can be
easily set and changed.
The vertical stroke of the presser foot and
walking foot (amount of alternating vertical
movement) can be easily changed with the large
dial mounted on the top of the machine head.
The sewing speed is automatically regulated
based on the vertical stroke setting.
ensures ideal sewing conditions at all times.
AC servomotor/controller
SC-380
The SC-380 is provided with many
different standard functions, including
speed-control, soft-start, automatic reverse
stitching with the specified number of
stitches, constant-dimension stitching, and
overlapped (multi-layered) stitching. These
functions ensure sewing performance
optimally suited to the material and
process.
The machine adopts a fully
automatic lubricating method.
With fully automatic lubrication, the
cumbersome task of oiling the machine by
hand is eliminated. Oil is forcedly
circulated through the face plate by a
plunger pump. This prevents oil leakage
from the face plate.
Consistent feed efficiency
at higher sewing speeds
With its powerful feed and optimal
feed locus, the machine smoothly
feeds materials
gathering even when running at a
higher sewing speed.
LU-2266N-7
The standard machine lets the operator
adjust the vertical stroke of the walking
foot and presser foot (DL device).
In processes such as the sewing of heavy
materials or hard-to-feed
portions, a press on the DL switch instantly
change over the vertical stroke of the walking
foot and presser foot. The result is beautifully
This produced seams without stitch gathering.
Some gauge used in the
LU-2210N/-2260N Series
The gauge (hook, bobbin, walking foot, presser
foot and feed) used in the LU-2210N/-2260N
Series is also used in this model. All of the parts
used in your LU-2210N/-2260N sewing machines
can also be used in the LU-2216N/-2266N
machines. In addition, the knife and thread tension
components are also the same.
The presser foot lift is as
high as 16mm.
The presser foot goes up as high as
16mm. This ample lift ensures easy
without stitch setting of heavy materials on the
machine and comfortable operation.
LU-2266N-7
Thread trimming without fail
With the rigidly moving knife shaft
multi-layered and optimal knife movement, the
thread trimmer cuts thick thread
without error.
Moreover, no adjustment is required
even when the yarn count is changed.
Operation panel that improves functions
of the sewing machine (optional)
The XC-E500 is provided with program sewing and
a host of other functions that contribute to increased
efficiency.
16
mm
LU-2266N-7
XC-E500