Power Button Board - Lenovo IdeaPad S100 Hardware Maintenance Manual

Lenovo IdeaPad S100 Hardware Maintenance Manual

Power button board

For access, remove these FRUs in order:
• "Battery pack" on page 31
• "Keyboard" on page 32
• "Base cover" on page 34
• "LCD unit" on page 51
• "LCD front bezel" on page 53
• "LCD panel" on page 54
• "Hinges" on page 56
Figure 26: Removal steps of power button board
1
2
The power button board is attached to the left side of the LCD cover.
Detach the connector in the direction shown by arrow . Remove the power
button board in the direction shown by arrow .
When installing: Attach the power button board to the left side of the LCD
cover and adjust its placement to make sure it is attached firmly.
57