Lenovo IdeaPad S100 Hardware Maintenance Manual
Hard disk drive
For access, remove these FRUs in order:
• "Battery pack" on page 31
• "Keyboard" on page 32
• "Base cover" on page 34
Figure 8: Removal steps of hard disk drive
Remove the two screws
then lift the hard drive disk in the direction shown by arrow
When installing: Make sure that the HDD connector is attached firmly.
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard disk
drive is sensitive to physical shock. Improper handling can cause damage and
permanent loss of data.
• Before removing the drive, suggest to the customer that they should back up all
the information on it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
1
Step
Screws (quantity)
M3.0 × 3.0 mm, flat round-head,
nylon-coated (2)
1
2
Color
Black
. Hold the HDD connector with one hand and pull
Torque
2.85 kgfcm
.
39