Table of Contents
Advertisement
EN
type that forms on the cook top or in the grout widths between tiles. It can be used to clean bathroom fixtures, sinks, cooker
racks, showers and baths, where it removes all traces of scale (
Angled nozzle ④
This attachment can be fitted to the gun nozzle (E) after inserting the cap ② or extension nozzle ①.
It is particularly useful for reaching and sterilising difficult areas, where dirt can build up unseen, on radiators, shutters, and
bathroom fixtures, removing it simply and quickly (
Upholstery brush ⑤
The fabric brush can be fitted straight onto the gun nozzle (E) or to the extension tubes ⑧. When the handy cloth ⑭ is
fitted, it is possible to use the brush to remove dust and for daily cleaning of sofas, armchairs, blankets, mattresses and
cushions (
). The brush can also be used to freshen up fabrics, removing all creases. In any case, we recommend, when
10
using for the first time and during normal use, to discharge the condensation from the steam into a container so as not to
wet the fabrics (
).
11
Window brush ⑥
The fabric brush ⑤ can be fitted with a window wiper: assemble the two attachments, placing the tabs at the base of the
fabric brush inside the hooks at the base of the window wiper. Use the window wiper to restore the polished shine to windows,
mirrors and gloss surfaces. It is also easy to use on shower cubicle glass, removing the problem of lime scale (
Floor brush ⑦
This accessory is used on extension tubes ⑧ and it has handy cloth grips that can hold, as well as the cloth provided ⑬,
any type of machine washable cloth. To fit the cloth, place the brush in the middle, lift the clips at the ends of the brush,
insert a flap of cloth and then release the clips (
Extension tubes ⑧
The extension tubes snap together and can be easily separated by pressing the release button. They are useful for reach-
ing high surfaces with the window wiper ⑥, using the special extension joint, or they can be used with the floor brush ⑦
(
).
14
Attachment bag ⑨
The appliance comes with a bag for the attachments, which is handy for storage as well as for keeping them close at hand
(
).
15
FILLING THE WATER TANK DURING USE
If the tank (P) should remain without water during use, the appliance will vibrate and its noise will become more intense; in
this case, switch off the appliance and unplug it from the mains power before filling the tank as described in the paragraph
"INSTRUCTIONS FOR USE".
IMPORTANT: If the appliance is not promptly switched off, the pump might overheat and momentarily
cause the appliance to block. Fill the tank (P) and wait a few moments for the appliance to start working
again normally.
We recommend checking the water level inside the appliance constantly and to fill the tank (P) as described in the paragraph
"INSTRUCTIONS FOR USE". In this case, it will not be necessary to switch off or unplug the appliance.
Emptying the water tank (P)
•
In case of a long period of disuse, take out the water tank and empty it, so as to prevent the formation of scale residues,
which might affect the normal operation of the appliance.
Emptying and cleaning the detergent reservoir
Cleaning the detergent reservoir:
•
Press the dispensing button (A) and dispense all of the detergent in the appliance into a suitable recipient, using water, or
empty the detergent container into a recipient, being sure to rinse it out thoroughly;
•
Remove the cap (Q) and fill the detergent container with water;
•
Press the button (A) several times to remove all detergent residues. Repeat the operations until only water is dispensed;
).
9
).
13
CLEANING AND MAINTENANCE
).
8
- 8 -
).
12
Hide quick links:
Advertisement
Table of Contents
